Mapping clean energy work to the three Dhanasar prongs
Matter of Dhanasar sets out three prongs a petition must address: (1) the endeavor has substantial merit and national importance, (2) the petitioner is well positioned to advance it, (3) on balance it is beneficial to waive the job offer and labor certification requirement. Before drafting anything, restate your actual work — a grid storage deployment, a carbon capture pilot, a renewable interconnection study, a climate model, a policy analysis — as a single endeavor, not a job title or employer description.
Draft a one-sentence endeavor statement
Write one sentence naming the specific technical or policy problem your work addresses and the mechanism by which it addresses it. Two examples:
- Battery storage engineer: "My endeavor is to design and validate grid-scale lithium-ion battery storage systems that reduce curtailment of intermittent renewable generation on regional transmission networks."
- Climate policy researcher: "My endeavor is to develop quantitative frameworks for evaluating state-level decarbonization policy design, used by agencies setting renewable portfolio standards."
Map the sentence to each prong
For each sentence, identify: what makes it nationally important (scale, sector, public cost of the problem); what in your training, publications, patents, or role shows you are positioned to carry it out; and what would be lost, in process or time, by requiring a labor certification route instead. Document each mapping separately — the later sections build evidence for exactly these three claims.
Documenting national importance with field-specific sources
Where to look
- DOE and NREL technical reports — DOE's Office of Energy Efficiency and Renewable Energy and national laboratory reports (NREL, Lawrence Berkeley, PNNL) publish cost curves, deployment projections, and technology gap analyses. Search NREL's publications database and DOE's Office of Scientific and Technical Information (OSTI.gov).
- IPCC and IEA publications — IPCC assessment reports and IEA's World Energy Outlook and technology roadmaps quantify global targets and shortfalls (e.g., storage capacity needed, emissions reduction gaps).
- Federal and state policy documents — Inflation Reduction Act program guidance, DOE Loan Programs Office materials, and state Renewable Portfolio Standard statutes establish specific numeric targets and deadlines.
- Peer-reviewed journals — Nature Energy, Joule, Environmental Research Letters, and similar venues for technical validation and field consensus on a problem's significance.
Writing the citation summary
For each source, write one paragraph stating what the source establishes and how the petitioner's specific work addresses it. Illustrative template, not a real source:
The NREL report cited establishes a projected shortfall in grid-scale storage capacity relative to renewable deployment targets for a stated year. The petitioner's work on [specific technical contribution] addresses this shortfall by [specific mechanism], as shown in Exhibit [X].
Do not cite a source without this link. A list of reports with no stated connection to the petitioner's own work is a common gap reviewers flag.
Building the personal endeavor statement and evidence index
The personal statement is the attachment to the I-140 cover letter that ties the endeavor to the evidence. Draft it after the evidence is gathered, not before, so every claim can point to an exhibit.
Step 1: Describe the endeavor
Open with two to three sentences stating the specific work — the technology, the scale, the setting. Avoid restating job duties; describe the undertaking itself.
Step 2: Summarize prior achievements
Walk through the petitioner's record in chronological or thematic order, citing an exhibit after each claim — "(Exhibit C)" — rather than describing documents in the abstract.
Step 3: Lay out the future plan
Explain concretely what the petitioner intends to do over the next several years, referencing any letters, project plans, or funding documents that support feasibility.
Step 4: Keep it to 3-5 pages
Use plain paragraphs, not legal argument headings. Let exhibits carry technical depth; the statement should read as a narrative, not a brief.
Step 5: Build the evidence index
List every exhibit in a single table, matching labels exactly to the PDF file names and cover-letter references.
| Exhibit | Document Type | Source | Date | What It Demonstrates | Prong |
|---|---|---|---|---|---|
| A | CV | Petitioner | 2026 | Education, work history | 1, 2 |
| B | DOE technical report | energy.gov | 2024 | Field-level importance of storage work | 1 |
| C | Letter of recommendation | Independent expert | 2025 | Independent assessment of contribution | 2, 3 |
Cross-check: every exhibit cited in the statement appears in the index, and every row in the index is cited somewhere in the statement.
Assembling letters of recommendation and independent evidence
Recommendation letters carry weight only when they add information the petitioner cannot supply alone. Select two groups:
Recommenders with direct knowledge
Current or former supervisors, project leads, or close collaborators who can describe specific contributions — a storage algorithm deployed, a modeling framework adopted, a policy brief that shaped a program decision. These letters should name the project, the dates, the petitioner's specific role, and a measurable result.
Independent recommenders
Experts who have not worked with the petitioner directly — faculty at other institutions, engineers at other firms, policy analysts at other agencies. Their letters should explain how they know of the work (publications, conference presentations, deployed systems, cited reports) and offer an independent assessment of why that area of work carries broader importance. Avoid recommenders who only restate the petitioner's own resume language.
Avoiding generic language
A letter built from a template — identical paragraph structure, no dates, no project names, interchangeable praise — reads as boilerplate and is a common RFE trigger. Each letter should read as though only that recommender could have written it.
Independent corroboration
Supplement letters with data the petitioner does not control:
- Citation counts — Google Scholar profile, exported as a dated screenshot or PDF.
- Patent records — USPTO Patent Public Search, citing application or grant number.
- Deployment or adoption data — utility filings, DOE program reports, or project deployment summaries showing scale or use.
Label each as its own exhibit and cross-reference it in the evidence index.
Compiling supporting documents: credentials, employment, and project records
Standard document categories
- Academic credentials: degree certificates, transcripts. If earned outside the United States, include a credential evaluation from a NACES or AICE member organization establishing US equivalency.
- Employment verification: letters from current and former employers on letterhead, stating title, dates, duties, and salary where relevant.
- Project and technical reports: internal project reports, deployment summaries, DOE or NREL-funded project deliverables, environmental impact assessments.
- Patents: issued patents or published applications, pulled directly from USPTO Patent Public Search with inventor and assignee pages included.
- Grant awards: award letters or notices of funding from federal agencies (DOE, NSF, ARPA-E) or state programs, showing amount and role.
- Conference proceedings: accepted papers, presentation programs, and abstracts showing the petitioner as author or presenter.
File naming and organization
Use a consistent convention tied to the evidence index: ExhibitA_CV.pdf, ExhibitB_DOE_Report_2023.pdf, ExhibitC_Patent_US1234567.pdf. Keep exhibit letters sequential and unchanged once assigned; renumbering after the personal statement is drafted creates mismatches that are a common source of confusion for reviewing officers.
Table of contents
Compile all exhibits into a single PDF and add a table of contents as the first page, listing each exhibit letter, document title, and page number, matching the evidence index exactly. This lets a reader move from a citation in the personal statement to the underlying document without searching.
Every exhibit must be loose-leaf before scanning — remove staples and sticky notes, and scan at a resolution that keeps text legible.
Store the master PDF and index version together, and update the table of contents each time an exhibit is added, removed, or replaced before filing.
Watch for
- Degree certificates without evaluations when the issuing country is not the United States.
- Employment letters missing dates or signatures.
- Exhibit labels in the table of contents that do not match labels cited in the personal statement.
- Reordering exhibits after the evidence index has already been finalized, leaving stale cross-references.
Filing the I-140: forms, fees, and premium processing
Forms
- Form I-140, Immigrant Petition for Alien Worker — select the EB-2 classification and the National Interest Waiver basis in the relevant part of the form. Complete every part; where a part does not apply, enter "N/A" rather than leaving it blank.
- Attach any continuation sheets the form requires if an answer exceeds the space provided. Label each continuation sheet with the Part and item number it continues.
- Form G-28, Notice of Entry of Appearance as Attorney or Accredited Representative — include only if a representative is filing on the petitioner's behalf. If self-filing, omit it entirely.
- Confirm you are using the current edition of each form, listed on its USCIS form page, before assembling the packet.
Fees
Form I-140 carries a base filing fee and a separate Asylum Program Fee. These are paid as two separate payments of the same payment type — either check or money order, or two separate Form G-1450 authorizations if paying by card. Do not combine them into a single payment. Confirm current amounts for both, and whether any other fee applies to your filing, using the USCIS Fee Calculator or the USCIS Fee Schedule immediately before filing, since fees change.
Premium processing
Form I-140 petitions filed under the EB-2 National Interest Waiver classification have been eligible for premium processing continuously since January 30, 2023. If requesting it, file Form I-907 with the required fee. The processing timeframe is counted in business days; confirm the current timeframe on uscis.gov before relying on it.
Checking priority date status on the Visa Bulletin
Once Form I-140 is filed, the next step before applying for adjustment of status or consular processing is tracking the priority date against the Visa Bulletin, published monthly by the Department of State at travel.state.gov.
Locate the right row and column
Find the EB-2 row and the column for the petitioner's country of chargeability (usually country of birth). Most countries fall under "All Chargeability Areas Except Those Listed," but China and India have separate columns with their own cutoff dates.
Read the two charts
The Visa Bulletin publishes two charts each month: Final Action Dates and Dates for Filing. USCIS announces, for each month, which chart applicants should use to determine filing eligibility; check the USCIS Visa Bulletin page for that instruction before relying on either chart.
Compare the priority date to the cutoff
- A priority date earlier than the cutoff date shown in the cell is current.
- A priority date equal to the cutoff date is not current.
- A cell marked "C" means current — no cutoff applies.
- A cell marked "U" means unavailable.
Expect month-to-month change
Cutoff dates can advance to a later date, hold steady, or retrogress to an earlier date or to "U" in a later bulletin. A category that is current one month is not guaranteed to remain current.
Check the current Visa Bulletin and the related guidance on uscis.gov each month before taking any filing action based on priority date status.
Final RFE-avoidance checklist before submission
Before assembling the final packet, work through the entire file exhibit by exhibit rather than skimming. A single mismatch between the personal statement and the evidence index is one of the most common triggers for a request for evidence.
Cross-check list
- Every exhibit letter cited in the personal statement appears in the evidence index, and every exhibit in the index is cited somewhere in the statement or a recommendation letter.
- Each recommendation letter references at least one piece of independent evidence (a publication, patent, deployment report, or dataset) rather than relying solely on the recommender's own assertions.
- Every source citation — DOE, NREL, IPCC, IEA, journal article, or state program document — includes a date and a sentence tying it specifically to the endeavor, not just a general statement of field importance.
- All fees — the I-140 filing fee, the Asylum Program Fee, and any other applicable fee — have been confirmed on the USCIS Fee Calculator or Fee Schedule and prepared as separate payments of the same payment type.
- Form I-140, Form G-28 if applicable, and any supplement are the current editions confirmed on uscis.gov, and all required signatures are present in ink or valid electronic form.
- Continuation sheets are attached wherever a form field runs out of space; a missing continuation sheet is a frequent and avoidable error.
Common failure modes to screen for
- Recommendation letters using interchangeable, generic language across multiple recommenders
- Citations listed without explanation of relevance to the petitioner's specific work
- Exhibit labels that shift between the statement, the index, and the physical file
- Incomplete or unsigned forms, or missing continuation sheets
You may also like
EB-2 NIW for Pakistani IT and Data Science Professionals
Organize the evidence, credential documentation, and petition structure specific to IT and data science backgrounds trained or employed in Pakistan.
Read →EB-2 NIW for Bangladeshi Academics and Professionals
Learn how to assemble degree, credential, and employment evidence from Bangladeshi institutions into a US-recognised EB-2 NIW petition package.
Read →EB-2 NIW for Colombian and Venezuelan Professionals
Learn how to assemble foreign credential, employment, and country-condition evidence from Colombia and Venezuela into a self-filed EB-2 NIW petition.
Read →